30KN Hydraulic Cable Laying Tensioner Used For OPGW ADSS
A transmission line tension stringing and aerial cableway erection
job tension of the tension machine. The liner is fixed round groove
of the main driven wheels arranged in parallel composition, and a
diameter of the driven wheel driving wheel diameter 0.6 to 0.95,
the master, the driven wheel two further fixed wheel and two or
more groove substrate. When the wire is rotated by external
traction rounds, only the large diameter drive wheel braking force
that is applied. Selection round slot liner material of different
coefficient of friction the wire by force, to avoid wire lantern,
to protect the wire and release the tension wheel uniform wire.
While the whole weight, smaller in size and lower cost.
Automatic hydraulic tensile machine manufacturer in Germany ZECK
Features: Each friction wheel is driven by a hydraulic motor
planetary gear transmission efficiency, frustrated not stop and
then start producing sheet when the wire damage. Friction wheel
with a special pad to protect the wires, replace the easy life
assurance work up to 1200 hours. Patents have ground and pressure
line features automatic rope fixed.
30KN Hydraulic Wire Conductor Tensioner Used in 220KV Overhead Line
Transmission is used to string various conducts and earthwire.
1. Bullwheel with wearproof MC nylon lining segments.
2. infinitely variable tension control and constant tension
conductor stringing .
3. it adapt Italian reducer .
4. spring applied hydraulic released brake acts automatically in
case of hydraulic
failure to ensure safety
1. vEngine :Domestic water –cooled engine .
2. Main pump/motor ,Chinese famous branded pump and motor .
3. Reducer :RR(Italian )
4. Radiator: AKG
5. Hydraulic instrument : WIKA
6. It can choose import engine.
3560 ×1600 ×2220
|Max Continual Tension(KN)||25|
|Diameter of Tension wheel(mm)||1200|
|Solt No. of Tension wheel||5|
|Rated Pulling Force (KN)||30|
|Max Pulling Speed(km/h)||5 km/h|
|Max dia of wire||Φ32mm|
|Engine Power||11KW/ 2200 r/min|